Effective : prior to June 2024
Replacing a Lift Cord : Instructions

Step 1: 
Before beginning the replacement, take your shade down from the window and lay it on a flat surface.

Step 2: 
Remove the breakaway tassel, decorative tassel, and cord stops.

Step 3: 
Remove the old cord by untying it from the bottom ring. Once it has been untied, gently pull the cord until it comes out through the cord stop and pulleys. Then, pull it through the grommet at the top of the shade and through the rings and cord shroud on the back of the shade.

Step 4:
Tie the new cord to the bottom ring. Then, restring the shade by weaving it through the cord shroud and rings on the back of the shade.

Step 5:
Once you have reached the top of the shade, string the cord through the grommet to the front of the shade and back through the pulleys and cord lock.

To restring the pulley, push the cord through the side of the pulley and out of the top. To restring the cord lock, hold the top gear on the cord lock up and string the lift cord through the two gears and out.

Step 6:
To finish, reattach the cord stops, breakaway tassel, and decorative tassel.

When reattaching the cord stops, make sure that the stops are tied evenly on each lift cord. When reattaching the breakaway tassel, make sure that the cords are even and restring them through the holes. Tie a knot on the end of each cord once it has been strung through the tassel to hold it in place.