Cordless Handle - TS- MMK DSS

Adding a Dual Sheer Shade Cordless Handle 

The handle consists of two small, clear plastic parts that easily slot together.  The handle piece should slide in and forward to the longer side of the clip.

With the shade installed, flip the hem bar up, so you are working with it flipped upside down to expose the channel at the bottom.

Hook the short side of the clip into the channel and push the longer side of the clip in slightly to snap the other leg of the clip into the channel

The handle will move freely in the channel to easily center on your shade.

Removing a Dual Sheer Shade Cordless Handle

With the shade installed, flip the hem bar up so you are working with it upside down, to expose the handle and the channel on the bottom of the hem bar.

Press the handle in towards the shade fabric to compress the clip

This should snap the clip closest to you out of the channel and allow the far side of the clip to tip up and out of the channel.

Now you are free to operate your shade directly by the hem bar.